Scan Dots Too Large, Probe Window Problem, How To Create Colored Features
Hey guys, I have three problems that while not urgent to fix border on the annoying. 1st is when I create a scan with CAD or no CAD the dots are huge & obscure things on the monitor. In the picture...
View ArticleVariable for QR code
Hello all , I have problem with QR code. I have 28 place code from part and i need from code apply 18-21 position . I need to write into variable only this 4 position. I don´t know how to do . Thank...
View ArticleClik here to view.
2017R1 : "F5 :Use circular moves on round features" doesn't...
All is in the title, I have to select circular moves in autofeatures to make it work, even if the case is selected in F5...
View ArticleTrue Position of a Slot/Notch question
Working on this program, and I have this slot that only has one rounded end. Normally, I would just make an auto-slot but I can't because of this condition. And I also, can't make an auto-notch because...
View ArticleClik here to view.
Syntax Error with "&" - vb script
I've been trying to use code I've found on the forums for saving programs but every time I tried I would get a syntax error on lines with the "&" symbol. I've copied and pasted code straight from...
View ArticleOutputting nominals into the report
We have a customer who changed their quality guy. Their new guy is taking a look at our reports, (that they've been accepting for years) and is now asking all kinds of questions, like: "What is I, J,...
View ArticleTESASTAR-PR can't edit slot type
Had to re-install Win7 under PC-DMIS 2014.1, and everything appears to be working. They bought new styli, and I'm re-building new probe definitions, but cannot assign the probes to the Probe Change...
View ArticleOGP MeasureX vs PC-DMIS Vision
Hello, What are the pros and cons of PC-DMIS Vision compared to OGP's MeasuresX software? And what about the durability of the Hexagon's hardware? Can it be used with a camera attached to a probe head?...
View Articlefiltering question
I have a scan from a laser CMS106 (or HP10.6). If I construct a filter set with values of outlier and wave length, and then construct a plane on it, I obtain a diiferent plane than one constructed and...
View Articlelegacy profile
Is anyone here familiar enough with legacy profile to explain the difference between form only and form and location? I think that form and location locks to the origin, but i am not sure how the form...
View ArticleCMM Z Axis Lost Home
Good Morning, I have been helping at one of our other facilities and all has been going ok. Until yesterday. I arrive, turn everything on.....and the cmm, fails to home in the "Z" axis. The rail rapids...
View ArticleClik here to view.
meaningful stats names from Pc dmis?
Anyone know how to change Pc-Dmis deafault stats transfer titles to something a little bit more meaningful than data/time? When going through a full folder it's tough to see if I've exported all the...
View ArticleArcs
I have parts with semi-circle grooves. PC-DMIS executes the hit correctly, but rotates the arc by 90° (at least on the GDW). Has anybody else had this experience? Ideas to fix it? Thanks and blessings,...
View ArticleData in Report repeats
I am using PC-DMIS CAD++. I have a program that measure two holes and reports on the true position. When I go to the report it show the same data twice. If I measure a third part, it repeats the data...
View ArticleHelp Measuring a gear box using 45 degree bevel gears
I am an engineer working with a supplier to develop a method for measuring our gear box. It uses 45 degree spiral bevel gears. The supplier is having difficulty measuring the angle between the shaft...
View ArticleRunout quaetion
I have a port with about 3 different diameters & a M18 thread. All diameters & the M18 have a runout callout of .002 to the diameter at the very end of the port. This entire port in cut with...
View ArticleSpecifying where operator mode opens files from
My question is pretty much all in the title. Can you separately specify where operator mode opens its files from? We have never really used it here before and we are just trying to limit where the...
View Articlegraphic display of points taken inside a feature when there is no model
I need to graphically display the points taken inside say a circle. There is no model I am running 2013 version
View ArticlePDF printer error message
Ive seen something similar in PCDMIS...like the drivers were uninstalled correctly. We are getting an error message that the printer is not activated, error code -41 in datapage. Its on AMYUNI document...
View ArticleOptimal desktop PC configuration for newest PC-DMIS.
Hello all. Yesterday was day, when our graphic card nvidia quadro 5000 left to silicon heaven. We are thinking to buy new desktop PC with highest possibilites of hardware for the future. Could you...
View Article
