Using a range of hits from a scan as imputs
is there any way of viewing the points in a scan so i can determine where i would like my star hit and end hits to be in the constructed set?
View ArticleClik here to view.
Comment/Input - layout
Hi Guys. I'v been trying to find a way to adjust the text to the right, when using the COMMENT/INPUT feature. It stays centered, and makes it a bit difficult to read, when my operator have to make a...
View ArticleThe best place to enter check distance in program
My program has some windows such as Fixture lay out, external object, prepare for DCC MODE immediately after DCC MODE begins in program. Then, I use move points and I make any feature in program. It...
View ArticleGD&T: loosen up the Position tolerance without changing the FCF?
Was talking with one of my engineers and he asked me how many axis do you need in a true position callout. It's has a angle and radius now controlled by a very tight tolerance FCF. He wanted to know...
View ArticlePC DMIS not importing all customer model GD&T
Good afternoon. My company recently purchased the Romer Absolute Arm and upgraded to CAD++2015.1(RELEASE). I am importing my models thru the DIRECT CATIA INTERFACE option. I am having problems with PC...
View ArticleGlobally add a comment
Hello All: I have included a screen shot that shows a Rev Control Box that I add to every program. Is there a way to make it appear on a new program, when I first create it? Yes, I really am that...
View ArticleAttempt at upgrading to 2016... Ugggg....
We are currently running PC-Dmis 2013 MR1 (service pack 5) on all of our online and offline workstations. We are attempting to upgrade one of the offline workstations to see if it's something we are...
View ArticleAiag ppap
Does anyone know if DataPage+ come out with a AIAG version of their PPAP yet?
View ArticleManual retract settings not updating
Hi. When I try changing this setting mid program, often (not always) it will not update, and will continue retracting to the default setting. I use this for measuring and locating off of tight bores....
View ArticleDid you notice the survey offered in the banner near the top of the page?
When I visit this page, most often I immediately scroll down about half a page to get to the posts. skipping over the banner and the stickys. Only when someone pointed it out, did I realize there was a...
View ArticleNeed DataPage+ to store Min/Max from Flatness measurement
PcDmis 2013 MR1, DP+ 2011 MR1. I have a situation that requires saving the min/max readings along with a flatness measurement in the DP+ database. The PcDmis report shows the numbers but when I open...
View ArticlePCDmis Profile VS Basic Dim.
I'm having a bit of a dispute with a customer. The attached blueprint shows the feature in question. The customer is measuring from the A Datum surface, down to the features in question, and reporting...
View ArticleWhere and how to weight compensation in CAD++2015
Where and how to weight compensation in CAD++2015. I want to know how to use WEIGHT COMPENSATION.
View ArticleProgram Help
I'm trying to measure a cylinder. After having done the first end (Y+), (A90B+180), I moved the probe to the back end to do the other side (Y-) (A90B0). Took plane hits, circle and two points....
View ArticleHow to check bidirectional position in xact measure.
How to check bidirectional position tolerance using xact measure.
View ArticleWhere to use with out diameter symbol in true position.
Can any one Help me To understand the position tolerance with out diameter symbol and with diameter symbol.
View ArticleHow the pin option in auto feature circle is used.
How the pin option in auto feature circle is used. Can any one help me To know the function pin in the auto circle feature.
View ArticleProbe calibration.
I watch the probe as it calibrates around the sphere and it is Not taking points around the exact equator of the sphere... It's always about 2 mm off from the equator in every attitude... It does come...
View ArticleSimple Fail Safe Operator Input Code?
Hi all, Just looking for a way of making operator input more obvious than it already is in our programs. In the program we ask the operators to enter the serial number of the parts by scanning the...
View ArticleProgramming and auto execute
I just had my computer upgraded and PcDmis re-installed. Now when I create a Point , Circle..etc.. the machine will actually take the points.. I need to know how to turn this off so I can program and...
View Article