Root and Tip Diameter of Gear From a Scan
I have scanned the profile of my gear but now want to find the root and tip diameters from this scan, i'm OK with finding the min and max points from a scan, but in this case i want the min and max...
View ArticleEdit window disappear.
I am running one program and only graphics window I can see on screen in execution. Could one of you tell me how it would be possible to see both edit and graphics windows on screen in execution.
View ArticleApplying a profile to a sphere.
I am trying to get a profile of a sphere to come out correctly. I have taken 250 hits on the sphere via Autosphere feature. I think the problem is coming from the fact that the radius of the sphere is...
View ArticleInstalling version 2016
I am making programs in PRG file in PCDMIS version 2010. My company is ordering version 2016 now. I have never installed version incomputer before. 1. I want to know that window to calibrate probe will...
View ArticleThe dimensions don't refresh.
Hi guys, We are using the Pcdmis 2015.0 version. In first instance i did a program according to an old CAD data so for this reason manually i changed the nominal values in the dimensions to match with...
View ArticleClik here to view.
Positional Tolerance for Holes and Counterbores
ASME Y14.5-2009 7.4.2 Same Positional Tolerance for Holes and Counterbores, Same Datum Reference, how do you construct this in PC-DMIS Xact Measure? When I select the drilled hole, I cannot select the...
View ArticleOffline Clearance Plane question - solved
I wrote a program using my offline license, within the program I am using clearplan but it seems that I could not turn it on in the features; hole & slot diameter. How do you use this in offline?
View ArticleReport issues with 2014.1
Hello all. Today i'm attempting to update to 2014.1........... I'm having issues getting reports that have the boxes around them. if you look at Pic1 this is what I get. If you look at pic2 that is...
View ArticleOffset
Hi all , I have a part multiple holes one of the hole is used as my origin, the other was drilled at an angle of 2.5 degree to the first. If I want to use pc dmis to calculate the perpendicular...
View ArticlePerpendicular Distance between two holes
Hi all , I have a part multiple holes one of the hole is used as my origin, the other was drilled at an angle of 2.5 degree to the first. If I want to use pc dmis to calculate the perpendicular...
View ArticlePASS/FAIL Banner on Custom Report
I need to display a PASS or FAIL text on a custom report if any of the dimensions in my program are out of tolerance. Anyone ever done this? TIA
View ArticleLight Force TP20 Modules
All, I'd really like to get some light force TP20 Modules but my boss had a stroke when he saw how much they cost. Can anyone recommend a place where I can get some at a decent price? Happy Tuesday, -Dan
View ArticleArticle 3
http://www.pcdmisforum.com/forum/pc-...-and-readpoint Hey, on the thread above, I read your explanation of read points and iterative alignments. Is it possible to go from a read point into a DCC...
View ArticlePCD 2015.1 - Why does it do that mysterious Changing Nominals?
Ok, first about me: Relatively new ( 2yrs) PCD user. But over 20years with B&S legacy; MM4, Avail, VM-300 and Datapage. Now, B&S 9-12-9 w/ PCD 2015.1 & Dp5+ W7 64bit & RC1. ( My 1st...
View ArticleClik here to view.
2D or 3D dimension? That tis the question.
Hi everyone, just a quick question. I am measuring the top of the pinion bore, with points in 8 places around the outside and inside (marked in red), to measure the thickness between them, and see if...
View ArticleMachine speed
Hi everyone , I am having a problem with the speed of my cmm my programs and calibration runs slow, even with the speed up to 100%, what can I do to improve this?
View ArticleArticle 5
Dave, Would you be willing to share your PPAP report in AS9102 format? tim.allard@rapiddtm.com Cheers! t.
View ArticleCalculating a in tolerance pass score percentage?
I know its probably possible with variables and arrays......but can somebody point me in the right direction on how to calculate the percentage of in tolerance dimensions overall in the report?
View ArticleHow to change from decimal degrees to degrees-minutes-seconds?
where do I change angles from decimal to degrees m s
View Article