export to excel
Hi I work on pcdmis two months and i need to advise. I need to transfer the measured values ​​to EXCEL but NOT ALL but MEAS and DEV. I have pcdmis 2010 version. Thanks for your advice
View Article2017 r2
Has anyone had this issue? I have this short program I have written. It measures 4-way, 2-way (rotate), and a point (level). After my alignment is finished I then measure an 8mm hole and call back true...
View ArticleLMS License issue
IT upgraded some of our computers to 2018R2 and I think they mixed up some of the licenses. We're having nothing but issues and now nothing is running PC-DMIS. I took a look at an offline computer that...
View ArticleHolding Down Trigger On Portbale arm Causes to start...
Hello, I am having trouble with operators holding down the trigger too long when taking a point while running our pcdmis programs. When they hold it down, it will show "scanning" and start taking a...
View ArticleProbe Readout Window
For some reason the probe readout window is missing (Ctrl+W). Anybody know how to get it back? It won't toggle on and off.
View Article2018 r2 sp4
From Hexagon (or Santa Klaus ?) : http://www.wilcoxassoc.com/public/PC...18_R2/SP4/x64/ • PCD-143502 - Fixed an issue where pressing Ctrl and left-clicking on a feature label did not work. • PCD-146045...
View ArticleTrue Position of two different size holes using ExactMeasure
Is there a way to get Exactmeasure to dimension the true position of two coaxial holes that are different sizes? I've got a Ø.6875 hole and a Ø.500 hole with a true position callout of .028 MMC to A,...
View ArticleClik here to view.
Full screen operator instruction...
Does anybody know if there is a way to set font size or otherwisee customize when I use report command for operator and fullscreen with a picture imported? I can't find anything anywhere and like to do...
View ArticleCost to import CAD
After 10 years we upgraded to 2018 which and I was surprised that CAD importing will cost 8 thousand dollars more. Does that seem correct in anyone else's experience?
View ArticleSIGH...Yet another LEGACY vs XACT thread regarding PROFILE
Morning Ladies and Gents, Of course I have a issue i need figuring out before XMAS break. I have a part. Pretty simple configuration. Basically a cup with the top in the form of a sphere. This sphere...
View ArticleClik here to view.
GDT_SYMBOLS not displayed on report
Hi all. I have a problem with one of my psdmis. I have got here three 2015 versions: - 64-bit offline on my personal desktop - 32-bit online with machine IMS - 64-bit online with machine Mitutoyo Last...
View ArticlePrinting the graphics window with the report automatically
I am looking to find out if there is a way to print the graphics window with the report once the program is done. I can run a program and print just the report, or manually go in an print the graphics...
View ArticlePC-DMIS Excel Issue
I am trying to use PC-DMIS to export data to Excel so I can analyze it. I've created another Excel file to look at the saved Excel files exported by PC-DMIS (1 Excel file per part). I use the Power...
View ArticlePC-DMIS to Excel
Good morning, I have accepted a position with Siemens where I am required to work both on and off-line. For off-line, I am setting up my Laptop and Desktop to export reports out of DMIS into excel....
View ArticleHow to recall features like line/circle from linear closed scan points?
I need to recall seperate features from linear scanned profile (using number of points from cloud). I tried but i don't know how to do exatly. Need help on this.
View ArticleError 163
In the control box the led message is blinking E-1-6-3. I looked up the error and all I found was that, that error means "Y axis bound up". I was able to troubkeshoot the error by cycling the power to...
View ArticlePRG file updates
Is there a setting in PC DMIS so that my prg file does not update everytime I run the program? It shows the latest date that I ran it. I want it to be the last time I saved it. I have ran a program 4...
View ArticleError During Auto Probe Change "Weight Balance"
Morning Gang, I've begun screwing around with our probe changer rack, it has been on the machine the entire time I've been with my company, and no one has ever used it. So it begins... I'm tired of...
View ArticlePc-dmis
I can not get PC-DMIS to launch. It is showing that it is open, but I can not see anything open. Anybody got any suggestions?
View ArticleIs this measurement even possible?
Hello. Running PC-DMIS 2018 R2 on an Optiv Performance 1z443 -------------------------------------------- The QM recently asked me to measure the OD of some parts with a +/-.00075mm tolerance. When...
View Article