Vectors
If i am using CAD model for measuring a part, do i need to adjust theoretical values and vectors with actual values and vectors ?
View ArticlePCDMIS stoped while scrolling on CAD report
Hello, i have big problem with 2016 latest SP. When i try to scroll more than 3 pages on CAD report every time PCDMIS stops with "Send report" error. Can somenone help me with this? thanks!
View ArticleProfile Reporting
On several customer prints there is a basic dimension locating a plane with a profile to a specified datum. But when reporting the Profile to that datum the basic dimension isn't included in the report...
View ArticleUsing a cmm as a thermometer
I just want to check the temperature of the room, at the cmm, during the night. Here is my solution, to record the temperature each 10 mn : Code: FPTR =FILE/OPEN,RECORD_TEMP.TXT,ADD DO/...
View ArticleProfile Gauge Check
I have a part that has a profile called out to ABC and a tolerance of +,- 3mm but the part is fails when measuring on CMM. So here at work an Engineer created a "Profile Gauge" which is a piece of...
View ArticlePerpendicularity call in PCDMIS
I have a part to measure for a customer and they have called out perpendicularity (perp.) as follows: [PERP][.001][A] and again [PERP][.001][B]. These callout both reference the same datums. Datum A is...
View ArticleExtra files created when I save
Whenever I save a file, I get a couple extra files created in the same folder. One .PRG^ and a .PRG~... They don't do any harm, I just delete them. How do I get this to stop, it's annoying deleting...
View ArticleOffline License access
We have an Offline license for 2014 on the generic cmm operator's computer. We are currently running 2016 the the CMM itself. How would I go about accessing the Offline license from another computer on...
View ArticleArticle 1
Thanks UKCMM I was afraid of that time is an issue however quality should never give in to time or methodically. Thanks I’ll do 150 UPR.
View Articlecounterbore depth
Is there a way to have the CMM get a countersink depth ? If so, please explain. Im operating without cad, just doing some work for my boss
View ArticleProbe Calibration Program
Good morning, I've been asked to put in a probe calibration program to calibrate probes at the beginning of the day. I've never had to do this before. How do I go about that?
View ArticleTo points scans
Not sure what happened in latest versions but in anything 2017 any grid scans will not convert to "TO POINTS" It just deletes the scan Please help tried saving to earlier version and opened but same...
View ArticleTransfered to another PC - licence expired while installing
Hello, i tried to find something on the forum but without resutl. We have new PC with Windows 10 64 bit, and licence HASP that worked before on Win7 32 bit. Now, when we try to install PCDMIS 2016 on...
View ArticleDatapage+ Part Retrieval
I have removed a selection of parts from the Datapage Desktop. Looking at the database size it looks like the part runs are still in there. Is there any we I can have them show on the Datapage Desktop...
View ArticleClik here to view.
Changing move spped and hit speed in the middle of a program
I have a tip qualification program and for some reason on one tip the move speed has increased to 100% and whatever hit speed. No where is there a command to change speed in the program and when I hit...
View ArticleChange inspection report to "Text Mode" in PCD2015??
Just had to upgrade to PCDMIS 2015. Does anyone know how to change the inspection report to "Text Mode"?? My operators like to leave notes on the reports.
View ArticleCombining programs
Hello, I am looking for a way to run 2 parts in one program. basically combining the programs. If I remember correctly I can call up one of the programs as a sub program and run them together correct?...
View ArticleClik here to view.
Auto tip - auto wrist ?
Hi there Pcdmis users I have an part that I try to measure as accurately as possible, I've tried different stuff but for mee it seems slowly to work like this, usually I'm a cad / cam user, hope you...
View Article