The drawing shown is an update of a part we make. Before the update the two holes through the bottom (A datum surface) were the B & C Datums.
Now the two holes are the B datum and we have no C datum.
CATIA highlights both holes when the B datum is selected. If I put a line between those two holes NET INSPECT will probably reject it. Any ideas on what kind of feature was intended to be constructed with that callout?
![Click image for larger version Name: cad1.jpg Views: 1 Size: 10.8 KB ID: 398133]( "cad1.jpg")
Now the two holes are the B datum and we have no C datum.
CATIA highlights both holes when the B datum is selected. If I put a line between those two holes NET INSPECT will probably reject it. Any ideas on what kind of feature was intended to be constructed with that callout?