Clik here to view.
Sample hits default
Hello All, Since updating to 2017, every time I open PCDMIS the auto circles and cylinders always have 3 sample hit on and also a .200in depth. I cannot see where to change this in the Settings Editor....
View ArticleClik here to view.
Article 2
I am using 2017 R1. Got a issue with path lines. Please take a look the attached screen shots. The yellow lines are measured lines. The problem happens on all the programs, non A0B0 tips. It will be...
View ArticleClik here to view.
Path lines issue
Hi, I am using 2017 R1. Got a issue with pah lines. Please take a look the attached screen shots. The yellow lines are measured lines. Many path lines stretched supper long and got into CMM table with...
View ArticleCylu
Hi all, can the true position of a cylinder be affected if the vector is in the reverse direction top to bottom
View ArticlePart not in correct location?
So... When I'm importing a LH part into datapage, my points are floating in the corners. When I import the LH fixture iges the same points work just fine.... when I import a LH part mating simulation...
View ArticleNew CNC - no RS232
Hi all - first let me say, I am not a PC-DMIS guy, I am the lead man in a mid sized machine shop. We have been using PC-DMIS in the shop for many years for on the machine probing of machined composite...
View ArticlePC-DMIS Setup from scratch
Hello, I'm new to PC-DMIS and CMMs although I've been in QA for years. My company recently bought a used Apollo rx-30 CMM with PC-DMIS 2012 MR1. Seems the original computer and probes wandered off some...
View ArticleVB.NET for Pc-Dmis
This could be posted in the wrong section.... Has anyone gone thru this course? VB.Net for PC-DMIS 301, link.
View ArticleIs it possible to control a CMM at a different facility from my computer?
Is it possible to control a CMM in a different facility from my offline seat? Note: I can remote into the CMM computer... but I am wondering, is there any sort of controller interface to physically...
View Articlerun two versions of pcdmis at the same time?
There are many times I'd like to have two PC-DMIS part programs side by side so I can compare them and copy things from one to the other... It just occurred to me that maybe I could do that with my...
View ArticleHow to remove comma from number value
I have been trying to search how to remove the comma in the number for datapage 5.0. If I have a four digit number to the left of the decimal, there is a comma, ex. 1,234.00 I would like the number to...
View ArticlePC-DMIS2017 MR1 Projected tolerance Zones
There is an issue when using Projected tolerance Zones for a True position callout. Using XactMeasure. XactMeasures when creating a dimension statement force worst point you can no longer Select Start...
View ArticleBasic code to view graphics
Does anyone know of a way ("Basic Code") to turn the View Graphics window on and off inside the program?
View ArticleGraphics window keeps centering x/y/z zero
I've been working on a program all morning and all of a sudden the CAD model started snapping to the center of the graphics window. I looked under f5 and the auto fit to scale is not selected. I'm dead...
View ArticleClik here to view.
Readpoint CAD Moved
Good Morning: I recently inserted a readpoint in my program. My CAD is now sitting away from the features outlines. Is there a way to move them back? I got the program from the machine and I'm viewing...
View ArticleSize Feature and DataPage
FYI The new size feature in PC-DMIS 2017 R1 does not import into DataPage+ 5.2 SP1. I use an external command to call up the DataPageStats.exe file. I have submitted a ticket about this into Tech...
View ArticleLinear Distance Following/Over a Curved Surface??
This is a new one for me here. I have a linear 12" Basic dim from an edge to a bore. However, the surface the bore is in is curved. The dimension is called out linearly, but normal to the curve of the...
View ArticleQuestion about marking
ISSUE SOLVED! Thanks Roberto (see below) We are in the process of moving from V3.7 to V2017. My question today is about feature/command marking. With V2017 marking is automatic when a feature or...
View ArticleConnect pc-dmis to I++ virtual cmm
Anyone has experience on connecting pc-dmis to an I++ server (e.g. UCC Server, virtual cmm)? Can offline seat connect, or it has to be an on-line license? How to set it up? Thanks RX
View ArticleArticle 9
I am not sure why you sent this to me; you should post it to the Forum instead. Two things here, Your attachment is too small to see clearly and I have not used a Romer Arm for well over 15 years so i...
View Article