Quick Scan Parameters
I don't see anything that will allow me to change the default parameters for a quick scan, such as boundary type. This is very frustrating...what is the point of a quick scan if you have to go in and...
View Articlecopy and paste
I wish to copy a section of one program and paste it into another The alignment is the same. it copies ok but does not allow me to Paste into a different program Please help
View Articleautomatio' for pcdmis2015.1
Why, I open the program by automation in the pcdmis2015.1 version, PCDMIS from online mode to offline mode, but can be opened and executed normally in 2014.1. The code is as follows: Private Sub...
View Articleautomatio' for pcdmis2015.1
Why, I open the program by automation in the pcdmis2015.1 , PCDMIS from online mode to offline mode, but can be opened and executed normally in 2014.1. The code is as follows: Private Sub...
View ArticleArticle 9
Good evening, I have been playing around with auto features and love it. However, I am now fuzzy about how o construct features. Can you explain that a little? Thanks.
View ArticleCreating shank probe
Hi all, I have created a shank probe in usrprobe.dat, it is a 3 by 13 mm tip with a flat bottom. I am using this to measure features that are .020" deep. the tip has a edge break on the end that is...
View ArticleClik here to view.
Assign number/text to variable from File I/O
I am trying to create a file to go with my programs that will read a file for a set of 4 numbers (cap screw locations) then it will ask the operator if he can run there, if he cannot, he will input new...
View ArticleRoundness error of cal sphere 2x to 3x higher
Happy Monday all, I have a B&S Performance Silver using PH10MQ, TP20/Std force body/module. I have a probe health routine, checking T1A0B0, T1A90B0, T1A90B90, T1A90B180, and T1A90B-90, with 23...
View ArticleClik here to view.
Issue with graphical view of green path lines in auto feature
is there any way to skip hole on a cone that has flats on it? i cant get it to rotate around even when i modify the start and end angles. Also, the path lines dont match the measurement strategy. not...
View ArticleCoordinates in Status Bar not Changing
Hello I'm running PC-DMIS 4.1 and although it usually works this time the coordinates in the status bar are not updating when I move the probe. I've tried restarting the computer, CMM, returning to the...
View ArticleConstruct a circle.
This should be an easy one, but for the life of me I can't figure it out. I'm trying to create a point where the circumference of a circle intersects/pierces a plane. What I'm having trouble with is...
View ArticleProbe head is moving when Enabled
Hello gents and gals. I have a weird one, when I click on Enable on my joystick the probe starts to move down on Z- its own. That is before I use the actual knob!! We have B&S One machine with...
View ArticleMachine Motor Won't Enable
Hi guys, Sorry to come on here with mechanical/machine issues but I'm going crazy as to why our CMM's motor won't enable. You'll have to excuse me as my knowledge is limited when it comes to the actual...
View ArticleAlignments
Hello everyone, Just back in the Programming world after 4 years of no programming. So I'm getting to know PC Dmis 2013, I was trained back with PC Dmis 4.0 So I hope someone can help me with an...
View ArticleAlignments: need basic training
Hello everyone, Just back in the Programming world after 4 years of no programming. So I'm getting to know PC Dmis 2013, I was trained back with PC Dmis 4.0 So I hope someone can help me with an...
View ArticleWhy is my Y axis dimension changing?
Please take a look at the code below. In SPH1, I use a variable (V2) to denote the distance from my origin, to the sphere, for my Y axis measurement. I then origin on the sphere, and re-measure it as...
View ArticleShowing IDs
Has anyone been having any issues with the IDs showing up, mainly the point info in 2017. When creating a new report, and certain point info I would normally show is not showing or hiding for that...
View ArticleHow straight is a row of holes.
Hi. I'm new to PC DMIS (fresh from a class). We are using 15.1 and have a Romer Arm, currently with a 3mm probe. Here's what I was asked to measure: A row of 70 drilled holes (.25" dia, spaced 1.5")....
View Article5-way and 9-way stylus holders for LEITZ_LSPX1H-T
Stylus holder 5 x Ø 2 mm M00-694-271-000 Stylus holder 9 x M3 M00-694-273-000 does anyone have experience with either of these holders? I am trying to program offline and i was looking for a diagram of...
View Article