Point Array
Curious if there is a way to create a grid or array of points. I'm using 2014 CAD, so I don't have any type of scanning capability, but am wanting to create a pointcloud on the surface of a part to...
View ArticleClik here to view.
Need help how to pop up the Pictures.
Good morning All. I took pictures how to load the part, but don't know how to have them pop up right after click "ok" from Comment. Need all your help. Thank you in adv.
View Articlebolt circle as a tertiary datum
2015.1 how can I use a bolt circle as a tertiary datum and use the datum shift or rotation?
View ArticleClik here to view.
Open offline window during measurement
How to measure after the measurement is competed If you open the offline window now, you can force the measurement window back.
View ArticleFree position alignment
When I was programming with CMM Manager there was a function called Free Position Alignment. The operator had to position the probe stylus over a specific feature and hit the "go" command. The program...
View ArticlePROBE RETRACT settings ?
So when I had my hard drive crash last week and we re-loaded DMIS on a new computer and got up and running I came up with an issue this morning. I am doing a manual alignment that using a small circle...
View ArticleHuge Arrows
Good morning, How do I change the size of the point arrows? (See pic) Thank you in advance.
View ArticleExporting a *PRG to a Text File
Good afternoon, How do I go about exporting a program file into a text file? I've never done it before. Thanks!
View Article"No probing within probelimit"
Hi, all. today i did run my calibration program and everyting seemed good, but after the first exchange of probes i reicive error message "TR_PRB01,no Probing within Probelimit !" to me it`s odd,...
View ArticleProfile does not take the whole curve of CAD
Hi, I have selected a curve to measure a 2D-profile. The strange thing is that PC-DMIS does not recognize the CAD curve entirely. It goes ok, untill one curve.. Then it goes out of screen. I understood...
View ArticleAlignments / Programming practices
I have a few questions concerning best programming practices. [1] If I have a feature with a true position callout to, let's say, datums -A-, -B-, and -C-, is it necessary that I set my alignment such...
View Articleexpand target zones
we have written a program to cad with our Romer arm and when we try to run the part we are not getting hits in the target zone. the hits will not register. is there anyway to expand the radius of a...
View ArticleJog Box
I was using the CMM the other day and I noticed the light for machine start would go out while operating it. It seems to go out and turn back on intermittently. IS this something I just have never...
View ArticleTip angles keep mysteriously appearing?
Both our online cmm and my offline seat have had the " T1A-5B-10" tip angle show up in the probe angle list without anyone knowing where it came from. We don't use it in any of the programs so that...
View Article"Leapfrog" Alignment on Oversize parts using CMM
Hello Everyone, We have an oversize part that will have to be moved at some point during the inspection as there is not enough travel on our machine, I have looked at our help file and the only mention...
View ArticleProblems with some mathematical formulas (DE/EN)
Hallo liebe Leute, ich hätte da eine Frage zu meiner Zeichnung / Skizze, die ich diesem Post angehängt habe. Um die Zeichnung / Skizze einmal zu erklären, ich habe 4 Kreise und muss mit den 4 Kreisen...
View ArticleClik here to view.
Values in Probe Changer doesn't saved
Hello, My colleague has a problem adjusting the parameters in Probe Changer after the changing is done (ex: 498.197 to 490) it worked but when pc-dmis application is turned off and reopened, the...
View ArticleMissing menu bar
Hi,I have aproblem with PcDmis Today, i drag by mistake the menu bar completely out of the limits of the screen (you see the shadow on the left side ).Someone knows how to reset the layout of pc dmis...
View ArticleCMM results issue
Hi everyone, I seem to be having a problem with one of my programs, I trying to call out a True Position on a hole, which seems to be giving me a result error of +0.84. Upon seeing this I decided to...
View Article