Clik here to view.
[2018 R1 SP2] PSA: Filtering wavelength value might be wrong
[2018 R1 SP2] PSA: Filtering wavelength value for adaptive plane scan might be wrong when using non-English version Only tested in 2018 R1 SP2. The available options for the "wavelength" value on the...
View ArticleNew to VB
I'm trying to pass a variable for work orde number from pc-dmis user input C2 =COMMENT/INPUT,NO,FULL SCREEN=NO, What is the Work Order #? ASSIGN/V1=C2.INPUT to VB script which creates excel file. The...
View ArticleArticle 4
you can send me the files to Don.Ruggieri@Hexagon.com if they are not too large
View ArticleClik here to view.
Clik here to view.
2018_R1 SP3 is on
here : http://software.hexagonmi.com/public...e/2018_R1/SP3/ No release note for the instant
View ArticleManual Alignment vs. DCC Alignment
When doing a Manual Alignment, is it necessary to use the print datums. Basically what I'd like to do is, a very simple, basic alignment for the manual alignment to make it as easy as possible on the...
View ArticleTESA_VISIO300_PROBE vs TESA_VISIO300GL_PROBE
Does anyone know the difference between these two probe builds TESA_VISIO300_PROBE and TESA_VISIO300GL_PROBE?
View ArticleClik here to view.
More Improved Hexa-website Problems (Vision Interface & metronics.dll)
Hello! I'm attempting to download the Vision interface for an Optiv CMM. Our portlock is programmed for Metronics, and the default install (of PC-DMIS 2014 SP2 using an Offline Portlock) does not...
View ArticleClear Planes
Good evening everyone, I have always used either Clearance Cube or insert my own move commands. What I want to learn how to use is Clear Planes. When I turn on CP, do I need to set a parameter or no?...
View ArticleClik here to view.
Display measuring result by color light on machine.
I am using Optiv classic 443. Normally, I see machine have color light red/Green. Can I show measuring result Pass/ No Pass on color light by RED and Green?
View ArticleProbe Head Orientation to Probe Rack
Good Morning, I have been loading and unloading probes in A0B0 and with my probe rack lined up on my Y axis. Probes loaded/unloaded great no problems. A hex tech was here and when he swapped out my...
View ArticleCleaning Up Nominals
I have a question. I normally program from a CAD model and I always get these funky I,J,K nominals. I normally clean them up and keep moving. Why does it happen in the first place? The CAD is "suppose"...
View ArticleExport CAD data and scanned points to IGES file?
I have an Xcel 7107 with Pcdmis version 2014 CAD++, LSP-X1 scanning probe. The Pcdmis version is 2014. I have a CAD model and I am scanning sections of the part. I am able to export the measured data...
View ArticleMeasuring hole on curved Surface
I have no Cad model and I need to measure a Hole on a curved surface, how do I go about this??
View ArticleWas this always here?
Notice: The PC-DMIS Forum is an informal support channel. Solutions and suggestions provided on this forum represent the opinion of the user providing them and we suggest you use caution and common...
View ArticleConstructing a Circle Feature Using Verctor, Surface and Measured Points.
Good evening, I am having the most trouble with this feature. I am using Clear planes and I wanted to use autocircle but the probe didn't behave the way I would have liked. I tried taking manual hits...
View ArticlePrimary datum size
Hi all, Anybody have any references to any standard and/or data that defines primary datum size and it's ability to constrain a part with reasonable repeat-ability? I went through Y14.5 -2009 and found...
View ArticleAligning to Datums That Are Three Circles Along the X Axis
Good evening, I am trying to align a part that are using three circles for datums that is on the x axis. Earlier, I created a circle, line, point alignment but I found the alignment really didn't hold...
View Article