Multiple single segments pattern postions
Hi Guys, I have to report Multiple single segments pattern position, I did in Xact measure report upper segment and lower segment together(70 holes), it came ok for upper segment and lower segment...
View ArticleCreate a sphere tangent to three planes
I am having trouble getting this true position on this part. I have attached a snippet of the print. I am using Version 2014 MR1 Cad++ . I am not using a cad model though. Any help would be...
View Article2 year Plan for Training: GD&T and Scanning
I have been told by the Quality Manager that he wants me to be the main CMM programmer at our facility. I already write all the programs on the B&S and a little bit on the Zeiss. I want more...
View ArticleArticle 1
Hey Inspector J! I gotta ask. How long have you had your Optiv? and how do you like it? (outside the circle crashes) Am really curious for your input 'cause we've got one (z443 like yours) and it's...
View ArticleIntersection point and wall thickness please help
I apologize if this has been asked before, but I searched on here without any luck to my dilemma with a intersection issue. I do gauge points now by constructing a plane and offset to the height needed...
View ArticleArticle 10
How can I make this CMM go faster, I have proven out the program but it is so slow, any ideas. Thanks everything is at 100 % .
View ArticleSpeed of CMM
How can I make this CMM go faster, I have proven out the program but it is so slow, any ideas. Thanks everything is at 100 % .
View ArticleCAD++ 2017 R1: want to rotate start/end angle of Radial Plane
morning. I need to rotate the start/end angle of a radial plane. I used to be able to grab the start/end points and rotate them around the center point and all the points would follow. now when I grab...
View ArticleV2014 and Win 10 (64bit)
I know, it's not officially supported. I know, I should be using Windows 7. If I had any choice in the matter, I wouldn't even have to ask the question, I'd have the computer I put the req in for. But...
View Article4 axis scanning
Morning all! I updated to 2017 R2. I now see a 4-axis scanning check box in my auto feature setup tab. Does anyone know what this is for? Thanks!
View ArticleClik here to view.
Calibration of probe A-5003-4011
I am starting to use a new probe for some parts with internal groves. I found a probe that will work for me. Renishaw A-5003-4011 (6 by 10mm star probe) it has x4 0.5mm probes sticking off each side....
View ArticleArticle 4
Hello BIGWIG7, Here is my email ID. krishnachaitanya.velisetty@hexagon.com. You can send the attachments to this address. Regards Krishna Chaitanya Velisetty Applications and Testing Engineer Hexagon...
View ArticleClik here to view.
Trying to probe small area, need suggestions
Using PCD 2017CAD++ with TTP PH10M... I have a part where the distance from the top of the part to the top of the tab is toleranced to +/- 0.001". On top of the tab, there is approx 0.008 amount of...
View ArticleCad levels?
So, Im in this program and I'm trying to bring up the Cad Model within the graphics window. The only problem is that I can't access Cad levels to insert the Cad model into the graphics window. How do I...
View ArticleAligning a part with a model imported as an .igs.
I am trying to set up a different way or even an automated way to align an open face impeller to the model to do surface profile inspection.Usually we do a manual align to the hub plane, hub circle and...
View ArticleEdit Window
Hi all , I am having a small issue, in my edit window I cannot highlight and delete it ?
View ArticleProfile of datum feature from parallel planes
I have a situation where Datum A is called out as 2 parallel planes approximately .09" apart. The profile tolerance is .004". When I dimension the profile of Datum A, I get a number very close to .09"....
View ArticleAuto Features Without CAD or print
I've been given a task. I must program a part using only the fixture and a customer provided sample panel. I have been given no print and no CAD. It's a sheet metal part in a holding fixture. Now, I've...
View ArticleEdit Window: cannot highlight and delete?
Hi all , I am having a small issue, in my edit window I cannot highlight and delete it ?
View ArticleHow do you make the check box stay checked in a form?
How do you make the check box stay checked in a form?
View Article