Star probe with different styli and parameter sets

I have a programming question for using a star probe with two tips, each being a different style. one is a D3L35 and a D1L50 Rigid (see pic). I want to use a different parameter set for each tip in an auto calibration with user comment YES/NO. I have created the parameter set I want for each, but how do I know that the parameter set is used for the intended tip? When I select a tip in the probe utilities, i do not see the parameter set name show up in the drop down list window.This is what I have so far....Help....
MODE/DCC
C1 =COMMENT/YESNO,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,
Please Edit Comment Text!
IF_GOTO/C1.INPUT=="NO",GOTO = L1
AUTOCALIBRATE/PROBE, PARAMETER_SET=3X35, QUALTOOL_MOVED=NO,
SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE 23789 FINISHED-1 USING SET 3X35
END AUTOCALIBRATE RESULTS FOR PROBE 23789 FINISHED-1 USING SET 3X35
AUTOCALIBRATE/PROBE, PARAMETER_SET=1MM x 50 RIGID, QUALTOOL_MOVED=NO,
SHOW_SUMMARY=NO, OVERWRITE_RESULTSFILE=NO
L1 =LABEL/