We are in the process of moving from V4.3MR1 to V2011MR1 and I've come across a problem that baffles me. This program was written in V4.3MR1 and measures 4 cones, Two are measuring 180° each of one tapered OD (11° included angle) and then another two are measuring 180° each of another tapered OD (33.4° included angle). My dilemma is that the two measurements for the 11° cones run fine in 2011 but the two cone measurements for the 33.4° cones flipped start and end angles.
Why do two measure as they should and the other two flip on me?
Any help is greatly appreciated.
Duane
Why do two measure as they should and the other two flip on me?
Any help is greatly appreciated.
Duane