Hello,
I am measuring what appears to me to be a fairly simply stamped steel part.
I wrote a program thought it was nice ran it and couldn't believe my eyes. I was essentially hitting nominal on every true position in the drawing. Alarm bells rang. This can't be right. The customer for some reason doesn't use diametrical tolerance zones in their drawings (no idea the customer is always right blah blah). Anyway I looked around tried tolerancing with a diametrical tolerance zone, but still looked too good to be true. It seems to me that I really missed something, but what? I am wondering if anyone could see some glaring issues I am missing. I don't see relearn or master on any of my auto feature settings. I have restarted the CMM, computer, recalibrated the probes, and ran the program 3 times it comes out essentially the same. I have deleted the dimensions and redone them multiple times with the same results. Used regular hits on the holes instead of scans with no change in results. Essentially I am stuck.
Thanks in advance for your help.
I'm still trying to figure out how to get the important part of the print down to size to attach. Also I would like to openly complain about the difficulty involved posting code or attaching anything for help.
I am measuring what appears to me to be a fairly simply stamped steel part.
I wrote a program thought it was nice ran it and couldn't believe my eyes. I was essentially hitting nominal on every true position in the drawing. Alarm bells rang. This can't be right. The customer for some reason doesn't use diametrical tolerance zones in their drawings (no idea the customer is always right blah blah). Anyway I looked around tried tolerancing with a diametrical tolerance zone, but still looked too good to be true. It seems to me that I really missed something, but what? I am wondering if anyone could see some glaring issues I am missing. I don't see relearn or master on any of my auto feature settings. I have restarted the CMM, computer, recalibrated the probes, and ran the program 3 times it comes out essentially the same. I have deleted the dimensions and redone them multiple times with the same results. Used regular hits on the holes instead of scans with no change in results. Essentially I am stuck.
Thanks in advance for your help.
I'm still trying to figure out how to get the important part of the print down to size to attach. Also I would like to openly complain about the difficulty involved posting code or attaching anything for help.
Code:
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
PREHIT/0.1181
MOVESPEED/ 100
RETRACT/0.1181
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,MEAS,TOL,DEV,OUTTOL, ,
LOADPROBE/5X90MM
TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<0.7703,-1.1293,-0.0056>,<0,-1,0>
ACTL/<9.2524,18.4058,-14.6622>,<0.0002411,-0.0003339,0.9999999>
MEAS/PLANE,3
HIT/BASIC,NORMAL,<1.17,-1.1293,0.9021>,<0,-1,0>,<8.7078,18.6321,-14.662>,USE THEO=YES
HIT/BASIC,NORMAL,<0.3265,-1.1293,-0.0191>,<0,-1,0>,<9.9081,18.632,-14.6622>,USE THEO=YES
HIT/BASIC,NORMAL,<0.8146,-1.1293,-0.8999>,<0,-1,0>,<9.1413,17.9534,-14.6623>,USE THEO=YES
ENDMEAS/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,PLN1
ALIGNMENT/TRANS,ZAXIS,PLN1
ALIGNMENT/END
CIR1 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
THEO/<0.8858,0.002,-0.0723>,<0,0,1>,0.3465
ACTL/<9.2993,18.5506,-0.0367>,<0,0,1>,0.3527
MEAS/CIRCLE,3,ZPLUS
HIT/BASIC,NORMAL,<1.0395,-0.0779,-0.0598>,<-0.8873041,0.4611848,0>,<9.4735,18.5785,-0.0361>,USE THEO=YES
HIT/BASIC,NORMAL,<0.9528,0.1617,-0.0879>,<-0.3866084,-0.922244,0>,<9.1252,18.5786,-0.0361>,USE THEO=YES
HIT/BASIC,NORMAL,<0.9188,-0.1681,-0.0693>,<-0.190355,0.9817153,0>,<9.3553,18.3834,-0.036>,USE THEO=YES
ENDMEAS/
CIR2 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
THEO/<0,1.7212,-0.068>,<0,0,1>,0.3465
ACTL/<7.5168,17.8051,-0.0406>,<0,0,1>,0.3527
MEAS/CIRCLE,3,ZPLUS
HIT/BASIC,NORMAL,<-0.0066,1.5481,-0.0423>,<0.0383288,0.9992652,0>,<7.3414,17.8234,-0.0393>,USE THEO=YES
HIT/BASIC,NORMAL,<0.1637,1.6645,-0.0694>,<-0.9450258,0.3269958,0>,<7.6921,17.824,-0.0393>,USE THEO=YES
HIT/BASIC,NORMAL,<0.1083,1.8564,-0.0922>,<-0.625257,-0.7804189,0>,<7.504,17.6292,-0.0392>,USE THEO=YES
ENDMEAS/
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/TRANS,XAXIS,CIR1
ALIGNMENT/TRANS,YAXIS,CIR1
ALIGNMENT/ROTATE_CIRCLE,XMINUS,TO,CIR1,AND,CIR2,ABOUT,ZPLUS
ALIGNMENT/END
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
DCC MODE!!!
CLEARP/ZPLUS,3.5,ZPLUS,0,ON
MODE/DCC
PLN2 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<-0.2518,0.1125,0>,<0,0,1>
ACTL/<-0.2515,0.1121,0.0003>,<0.0003151,0.0003027,0.9999999>
MEAS/PLANE,49
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-1.8999,0.6628,0>,<0,0,1>,<-1.8997,0.6624,0.0008>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.4824,0.6942,0>,<0,0,1>,<-1.4819,0.6936,0.0004>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.0473,0.9337,0>,<0,0,1>,<-1.0467,0.9332,0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.727,1.045,0>,<0,0,1>,<-0.7265,1.0445,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.3557,0.9346,0>,<0,0,1>,<-0.3552,0.9342,0>,USE THEO=YES
HIT/BASIC,NORMAL,<0.0597,0.743,0>,<0,0,1>,<0.0602,0.7424,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.4399,0.4943,0>,<0,0,1>,<0.4403,0.4936,0.0009>,USE THEO=YES
HIT/BASIC,NORMAL,<0.8189,0.3716,0>,<0,0,1>,<0.8196,0.371,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<1.0692,0.237,0>,<0,0,1>,<1.0697,0.2363,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<1.3951,0.083,0>,<0,0,1>,<1.3958,0.0822,0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<1.3446,-0.1215,0>,<0,0,1>,<1.3451,-0.1222,0.0003>,USE THEO=YES
HIT/BASIC,NORMAL,<1.2533,-0.4911,0>,<0,0,1>,<1.2539,-0.4919,0.0005>,USE THEO=YES
HIT/BASIC,NORMAL,<1.1132,-0.8239,0>,<0,0,1>,<1.1134,-0.8244,0.0004>,USE THEO=YES
HIT/BASIC,NORMAL,<1.0063,-1.1897,0>,<0,0,1>,<1.0069,-1.1904,0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<0.614,-0.9696,0>,<0,0,1>,<0.6139,-0.9697,0>,USE THEO=YES
HIT/BASIC,NORMAL,<0.128,-0.7267,0>,<0,0,1>,<0.128,-0.7269,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.4477,-0.4788,0>,<0,0,1>,<-0.4478,-0.479,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.0371,-0.1192,0>,<0,0,1>,<-1.0372,-0.1194,0.0004>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.4332,-0.0149,0>,<0,0,1>,<-1.4333,-0.0152,0.0008>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.7334,-0.2255,0>,<0,0,1>,<-1.7335,-0.2259,0.0012>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.942,-0.3333,0>,<0,0,1>,<-1.9424,-0.3335,0.0017>,USE THEO=YES
HIT/BASIC,NORMAL,<-2.2718,-0.1617,0>,<0,0,1>,<-2.2718,-0.1618,0.002>,USE THEO=YES
HIT/BASIC,NORMAL,<-2.1892,0.2505,0>,<0,0,1>,<-2.1892,0.2504,0.0012>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.8102,0.5084,0>,<0,0,1>,<-1.8097,0.5079,0.0006>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.1431,0.5975,0>,<0,0,1>,<-1.1426,0.5971,0.0003>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.7901,0.7942,0>,<0,0,1>,<-0.7896,0.7936,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.4406,0.7662,0>,<0,0,1>,<-0.44,0.7657,0>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.1284,0.6158,0>,<0,0,1>,<-0.1278,0.615,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.3123,0.3438,0>,<0,0,1>,<0.3129,0.3431,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.7351,0.1708,0>,<0,0,1>,<0.7358,0.1701,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<1.0572,0.027,0>,<0,0,1>,<1.0577,0.0264,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<1.1071,-0.2519,0>,<0,0,1>,<1.1076,-0.2527,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.8707,-0.5504,0>,<0,0,1>,<0.8706,-0.5507,0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<0.5412,-0.6131,0>,<0,0,1>,<0.541,-0.6135,0>,USE THEO=YES
HIT/BASIC,NORMAL,<0.2308,-0.4197,0>,<0,0,1>,<0.2308,-0.4199,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.1663,-0.2433,0>,<0,0,1>,<-0.1663,-0.2435,-0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.5121,-0.0947,0>,<0,0,1>,<-0.5123,-0.0947,0.0002>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.775,0.1237,0>,<0,0,1>,<-0.7751,0.1236,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.6637,0.2878,0>,<0,0,1>,<-1.6638,0.2873,0.0005>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.3934,0.3799,0>,<0,0,1>,<-1.3928,0.3794,0.0005>,USE THEO=YES
HIT/BASIC,NORMAL,<-1.0953,0.3451,0>,<0,0,1>,<-1.0947,0.3446,0.0004>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.7127,0.5964,0>,<0,0,1>,<-0.7121,0.5958,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.4396,0.4689,0>,<0,0,1>,<-0.4392,0.4682,0>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.4128,0.2205,0>,<0,0,1>,<-0.4123,0.2197,0>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.1995,0.3526,0>,<0,0,1>,<-0.1989,0.352,-0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.4574,0.1004,0>,<0,0,1>,<0.458,0.0999,0>,USE THEO=YES
HIT/BASIC,NORMAL,<0.7151,-0.0531,0>,<0,0,1>,<0.7154,-0.0537,0.0001>,USE THEO=YES
HIT/BASIC,NORMAL,<0.5273,-0.2239,0>,<0,0,1>,<0.527,-0.2242,0>,USE THEO=YES
HIT/BASIC,NORMAL,<0.1133,0.4713,0>,<0,0,1>,<0.1131,0.4712,0>,USE THEO=YES
ENDMEAS/
RMEAS/LEGACY (I,J,K, X,Y,Z)
MOVE/CLEARPLANE
CIR3 =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,0.3465
ACTL/<0,0,0.0006>,<0,0,1>,0.3526
TARG/<0,0,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<0.4580268,0.8889384,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=PLN2,PLN2,PLN2
AUTO WRIST=NO
CIRCULAR MOVES=CIRCULAR
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=15,DEPTH=0.06,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=0.05
AVOIDANCE MOVE=BOTH,DISTANCE=0.5
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MOVE/CLEARPLANE
CIR4 =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<-1.934,0,0>,<0,0,1>,0.3465
ACTL/<-1.9321,0,0.0006>,<0,0,1>,0.3526
TARG/<-1.934,0,0>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<0.4580268,0.8889384,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=PLN2,PLN2,PLN2
AUTO WRIST=NO
CIRCULAR MOVES=CIRCULAR
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=15,DEPTH=0.06,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=0.05
AVOIDANCE MOVE=BOTH,DISTANCE=0.5
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
PLN3 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<-3.8663,1.0531,-0.9502>,<0,0,1>
ACTL/<-3.8663,1.0526,-0.9535>,<0.0018932,0.0013188,0.9999973>
MEAS/PLANE,23
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-3.1713,1.2581,-0.9502>,<0,0,1>,<-3.1713,1.2577,-0.9551>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.3325,1.3495,-0.9502>,<0,0,1>,<-3.3328,1.3493,-0.9547>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.5262,1.4678,-0.9502>,<0,0,1>,<-3.5265,1.4676,-0.9545>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.7325,1.5443,-0.9502>,<0,0,1>,<-3.7328,1.5439,-0.9544>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.9716,1.6691,-0.9502>,<0,0,1>,<-3.9718,1.6689,-0.954>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.125,1.6286,-0.9502>,<0,0,1>,<-4.1254,1.6282,-0.9537>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.2771,1.5238,-0.9502>,<0,0,1>,<-4.2775,1.5234,-0.9534>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.3912,1.3675,-0.9502>,<0,0,1>,<-4.3915,1.367,-0.953>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.4723,1.2598,-0.9502>,<0,0,1>,<-4.4727,1.2592,-0.9528>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.5414,1.1186,-0.9502>,<0,0,1>,<-4.5416,1.1181,-0.9523>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.4866,0.8955,-0.9502>,<0,0,1>,<-4.4862,0.8946,-0.9521>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.4267,0.7279,-0.9502>,<0,0,1>,<-4.4262,0.727,-0.952>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.2677,0.5883,-0.9502>,<0,0,1>,<-4.2674,0.5875,-0.9521>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.0999,0.4873,-0.9502>,<0,0,1>,<-4.0996,0.4865,-0.9522>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.9683,0.43,-0.9502>,<0,0,1>,<-3.9682,0.4294,-0.9524>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.7052,0.3154,-0.9502>,<0,0,1>,<-3.7049,0.3146,-0.9529>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.4906,0.5638,-0.9502>,<0,0,1>,<-3.4901,0.5633,-0.9536>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.4003,0.7664,-0.9502>,<0,0,1>,<-3.4,0.7659,-0.9542>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.2651,0.9618,-0.9502>,<0,0,1>,<-3.2646,0.9612,-0.9546>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.2395,1.128,-0.9502>,<0,0,1>,<-3.2397,1.1278,-0.9548>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.6608,0.5165,-0.9502>,<0,0,1>,<-3.661,0.516,-0.9532>,USE THEO=YES
HIT/BASIC,NORMAL,<-3.3722,1.1411,-0.9502>,<0,0,1>,<-3.3718,1.1405,-0.9547>,USE THEO=YES
HIT/BASIC,NORMAL,<-4.0004,1.5121,-0.9502>,<0,0,1>,<-4.0004,1.5119,-0.954>,USE THEO=YES
ENDMEAS/
MOVE/CLEARPLANE
CIR6 =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<-3.9037,1.0149,-0.9502>,<0,0,1>,0.689
ACTL/<-3.9059,1.0114,-0.9493>,<0,0,1>,0.6998
TARG/<-3.9037,1.0149,-0.9502>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<0.4580268,0.8889384,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=PLN3,PLN3,PLN3
AUTO WRIST=NO
CIRCULAR MOVES=CIRCULAR
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=15,DEPTH=0.06,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=0.05
AVOIDANCE MOVE=BOTH,DISTANCE=0.5
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,PLN2
ALIGNMENT/TRANS,ZAXIS,PLN2
ALIGNMENT/TRANS,XAXIS,CIR6
ALIGNMENT/TRANS,YAXIS,CIR6
ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CIR6,AND,CIR4,ABOUT,ZPLUS
ALIGNMENT/END
PLN4 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<3.9496,-1.6825,-0.9502>,<0,0,1>
ACTL/<3.95,-1.683,-0.9556>,<0.0005132,0.0027841,0.999996>
MEAS/PLANE,21
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<3.4047,-1.3044,-0.9502>,<0,0,1>,<3.4052,-1.3049,-0.9565>,USE THEO=YES
HIT/BASIC,NORMAL,<3.5597,-1.2843,-0.9502>,<0,0,1>,<3.5605,-1.2848,-0.9565>,USE THEO=YES
HIT/BASIC,NORMAL,<3.7954,-1.2743,-0.9502>,<0,0,1>,<3.7962,-1.2749,-0.9565>,USE THEO=YES
HIT/BASIC,NORMAL,<3.9939,-1.2279,-0.9502>,<0,0,1>,<3.9946,-1.2283,-0.9568>,USE THEO=YES
HIT/BASIC,NORMAL,<4.2087,-1.2225,-0.9502>,<0,0,1>,<4.2094,-1.2231,-0.9569>,USE THEO=YES
HIT/BASIC,NORMAL,<4.41,-1.1992,-0.9502>,<0,0,1>,<4.4107,-1.1996,-0.9571>,USE THEO=YES
HIT/BASIC,NORMAL,<4.4997,-1.3243,-0.9502>,<0,0,1>,<4.5005,-1.325,-0.9568>,USE THEO=YES
HIT/BASIC,NORMAL,<4.4756,-1.5693,-0.9502>,<0,0,1>,<4.4757,-1.5699,-0.9562>,USE THEO=YES
HIT/BASIC,NORMAL,<4.4511,-1.9746,-0.9502>,<0,0,1>,<4.4511,-1.9752,-0.9554>,USE THEO=YES
HIT/BASIC,NORMAL,<4.3419,-2.255,-0.9502>,<0,0,1>,<4.3419,-2.2556,-0.9544>,USE THEO=YES
HIT/BASIC,NORMAL,<4.2224,-2.4318,-0.9502>,<0,0,1>,<4.2223,-2.4324,-0.9536>,USE THEO=YES
HIT/BASIC,NORMAL,<3.9564,-2.4916,-0.9502>,<0,0,1>,<3.9562,-2.4922,-0.9531>,USE THEO=YES
HIT/BASIC,NORMAL,<3.6941,-2.4085,-0.9502>,<0,0,1>,<3.6939,-2.4091,-0.9534>,USE THEO=YES
HIT/BASIC,NORMAL,<3.4972,-2.2832,-0.9502>,<0,0,1>,<3.4973,-2.2835,-0.9535>,USE THEO=YES
HIT/BASIC,NORMAL,<3.4136,-1.9922,-0.9502>,<0,0,1>,<3.4135,-1.9925,-0.9545>,USE THEO=YES
HIT/BASIC,NORMAL,<3.3722,-1.6349,-0.9502>,<0,0,1>,<3.3723,-1.6352,-0.9557>,USE THEO=YES
HIT/BASIC,NORMAL,<3.5807,-1.454,-0.9502>,<0,0,1>,<3.5814,-1.4543,-0.9562>,USE THEO=YES
HIT/BASIC,NORMAL,<3.9381,-1.4224,-0.9502>,<0,0,1>,<3.9388,-1.4229,-0.9564>,USE THEO=YES
HIT/BASIC,NORMAL,<4.2181,-1.3472,-0.9502>,<0,0,1>,<4.2188,-1.3476,-0.9565>,USE THEO=YES
HIT/BASIC,NORMAL,<4.2999,-1.6391,-0.9502>,<0,0,1>,<4.3007,-1.6397,-0.9563>,USE THEO=YES
HIT/BASIC,NORMAL,<3.6086,-1.5908,-0.9502>,<0,0,1>,<3.6085,-1.5914,-0.956>,USE THEO=YES
ENDMEAS/
MOVE/CLEARPLANE
CIR11 =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<3.937,-1.9685,-0.9502>,<0,0,1>,0.689
ACTL/<3.935,-1.9738,-0.9497>,<0,0,1>,0.6998
TARG/<3.937,-1.9685,-0.9502>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<0,1,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=PLN4,PLN4,PLN4
AUTO WRIST=NO
CIRCULAR MOVES=CIRCULAR
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=15,DEPTH=0.06,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=0.05
AVOIDANCE MOVE=BOTH,DISTANCE=0.5
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MOVE/CLEARPLANE
SCN1 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=213
,SHOW HITS=NO,SHOWALLPARAMS=YES
EXEC MODE=DEFINED, NOMS MODE=FIND NOMS,CLEARPLANE=YES,SINGLE POINT=NO,THICKNESS=0
FINDNOMS=0.125,SELECTEDONLY=YES,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=3,CAD Compensation=YES
DIR1=LINE,INCR=0.1
HITTYPE=VECTOR
INITVEC=0,0,1
DIRVEC=-0.0352419,0.9292858,0.3676762
CUTVEC=-0.9997386,0.0228647,0
ENDVEC=-0.0030603,-0.133811,0.9910021
PLANEVEC=-0.0226589,-0.990743,-0.133846
POINT1=3.8938,-1.2045,-0.9502
POINT2=3.9171,-0.1856,-0.0048
MEAS/SCAN
BASICSCAN/LINE,NUMBER OF HITS=213,SHOW HITS=NO,SHOWALLPARAMS=YES
<3.8938,-1.2045,-0.9502>,<3.9171,-0.1856,-0.0048>,CutVec=-0.9997386,0.0228647,0,DirVec=0.0228647,0.9997386,0
InitVec=0,0,1,EndVec=0,-0.1338804,0.9909975,THICKNESS=0
FILTER/DISTANCE,0.1
EXEC MODE=DEFINED
BOUNDARY/PLANE,<3.9171,-0.1856,-0.0048>,PlaneVec=-0.0226589,-0.9907431,-0.133846,Crossings=1
HITTYPE/VECTOR
NOMS MODE=FINDNOMS,0.125
ENDSCAN
ENDMEAS/
MOVE/CLEARPLANE
SCN2 =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=196
,SHOW HITS=NO,SHOWALLPARAMS=YES
EXEC MODE=DEFINED, NOMS MODE=FIND NOMS,CLEARPLANE=YES,SINGLE POINT=NO,THICKNESS=0
FINDNOMS=0.125,SELECTEDONLY=YES,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=3,CAD Compensation=YES
DIR1=LINE,INCR=0.1
HITTYPE=VECTOR
INITVEC=0,0,1
DIRVEC=0.9291621,0.0470643,0.3666644
CUTVEC=-0.0071819,0.9999742,0
ENDVEC=-0.0937636,-0.0006734,0.9955943
PLANEVEC=-0.9955686,-0.0071503,-0.093766
POINT1=0.6158,0.0111,-0.9502
POINT2=1.647,0.0185,-0.0024
MEAS/SCAN
BASICSCAN/LINE,NUMBER OF HITS=196,SHOW HITS=NO,SHOWALLPARAMS=YES
<0.6158,0.0111,-0.9502>,<1.647,0.0185,-0.0024>,CutVec=-0.0071819,0.9999742,0,DirVec=0.9999742,0.0071819,0
InitVec=0,0,1,EndVec=-0.0937684,0,0.995594,THICKNESS=0
FILTER/DISTANCE,0.1
EXEC MODE=DEFINED
BOUNDARY/PLANE,<1.647,0.0185,-0.0024>,PlaneVec=-0.9955686,-0.0071503,-0.093766,Crossings=1
HITTYPE/VECTOR
NOMS MODE=FINDNOMS,0.125
ENDSCAN
ENDMEAS/
MOVE/CLEARPLANE
CLEARP/ZPLUS,3.5,ZPLUS,0,OFF
MOVE/POINT,NORMAL,<1.6442,0.0040,5.6683>
TIP/T1A97.5B-180, SHANKIJK=0.0061, -0.9914, -0.1304, ANGLE=-179.9984
MOVE/POINT,NORMAL,<1.6721,-4.5434,9.9655>
MOVE/POINT,NORMAL,<3.8941,-4.5306,-0.5354>
MOVE/POINT,NORMAL,<3.8882,-3.5135,-1.4703>
MOVE/POINT,NORMAL,<3.8846,-2.9310,-1.8493>
PLNA =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<2.0812,-1.0695,-1.1293>,<0,0,-1>
ACTL/<2.0817,-1.069,-1.1288>,<-0.0010023,-0.0020367,-0.9999974>
MEAS/PLANE,17
HIT/BASIC,NORMAL,<3.9169,-2.5157,-1.1293>,<0,0,-1>,<3.9179,-2.5152,-1.1269>,USE THEO=YES
HIT/BASIC,NORMAL,<4.2116,-2.4294,-1.1293>,<0,0,-1>,<4.2122,-2.4287,-1.1276>,USE THEO=YES
HIT/BASIC,NORMAL,<4.3977,-2.273,-1.1293>,<0,0,-1>,<4.3984,-2.2724,-1.1282>,USE THEO=YES
HIT/BASIC,NORMAL,<4.4848,-1.977,-1.1293>,<0,0,-1>,<4.4858,-1.9764,-1.1293>,USE THEO=YES
HIT/BASIC,NORMAL,<4.3899,-1.5765,-1.1293>,<0,0,-1>,<4.3904,-1.576,-1.1304>,USE THEO=YES
HIT/BASIC,NORMAL,<4.016,-1.4599,-1.1293>,<0,0,-1>,<4.0162,-1.4594,-1.1306>,USE THEO=YES
HIT/BASIC,NORMAL,<3.5317,-1.4704,-1.1293>,<0,0,-1>,<3.532,-1.4699,-1.1303>,USE THEO=YES
HIT/BASIC,NORMAL,<3.4194,-1.8775,-1.1293>,<0,0,-1>,<3.4196,-1.8771,-1.1289>,USE THEO=YES
HIT/BASIC,NORMAL,<3.5655,-2.2463,-1.1293>,<0,0,-1>,<3.5663,-2.2458,-1.1279>,USE THEO=YES
HIT/BASIC,NORMAL,<0.4765,-0.5145,-1.1293>,<0,0,-1>,<0.4768,-0.514,-1.1276>,USE THEO=YES
HIT/BASIC,NORMAL,<0.5107,0.5305,-1.1293>,<0,0,-1>,<0.5116,0.5311,-1.1294>,USE THEO=YES
HIT/BASIC,NORMAL,<0.0873,0.5816,-1.1293>,<0,0,-1>,<0.0875,0.5821,-1.13>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.3827,0.4673,-1.1293>,<0,0,-1>,<-0.3824,0.4678,-1.1295>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.5961,0.0246,-1.1293>,<0,0,-1>,<-0.5959,0.0252,-1.1288>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.4648,-0.3837,-1.1293>,<0,0,-1>,<-0.4639,-0.3832,-1.1279>,USE THEO=YES
HIT/BASIC,NORMAL,<-0.239,-0.5054,-1.1293>,<0,0,-1>,<-0.2383,-0.5048,-1.1279>,USE THEO=YES
HIT/BASIC,NORMAL,<0.0541,-0.5562,-1.1293>,<0,0,-1>,<0.055,-0.5557,-1.1281>,USE THEO=YES
ENDMEAS/
MOVE/POINT,NORMAL,<0.0596,-1.3536,-1.3457>
MOVE/POINT,NORMAL,<0.0592,-1.3529,3.9806>
TIP/T1A90B97.5, SHANKIJK=-0.9906, -0.1367, 0, ANGLE=90.0066
MOVE/POINT,NORMAL,<4.6204,-4.0239,2.2700>
MOVE/POINT,NORMAL,<4.5920,0.6317,2.3021>
MOVE/POINT,NORMAL,<5.2305,0.8799,1.7592>
PLN7 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<6.0418,0.9307,1.9618>,<-0.9882284,-0.1529858,0>
ACTL/<6.0282,0.9276,1.9622>,<-0.9893669,-0.1454143,-0.0027865>
MEAS/PLANE,35
HIT/BASIC,NORMAL,<5.9451,1.5555,1.2886>,<-0.9882284,-0.1529858,0>,<5.9381,1.5536,1.2888>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9758,1.3576,1.283>,<-0.9882284,-0.1529858,0>,<5.9674,1.3553,1.2833>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0139,1.1111,1.2887>,<-0.9882284,-0.1529858,0>,<6.0037,1.1086,1.2892>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0467,0.8994,1.2716>,<-0.9882284,-0.1529858,0>,<6.035,0.8965,1.2718>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0797,0.686,1.2293>,<-0.9882284,-0.1529858,0>,<6.0662,0.683,1.2295>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1221,0.4122,1.2546>,<-0.9882284,-0.1529858,0>,<6.1063,0.4086,1.2552>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1461,0.2573,1.3091>,<-0.9882284,-0.1529858,0>,<6.1287,0.2537,1.3096>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1267,0.3825,1.4816>,<-0.9882284,-0.1529858,0>,<6.1101,0.379,1.4822>,USE THEO=YES
HIT/BASIC,NORMAL,<6.094,0.594,1.5637>,<-0.9882284,-0.1529858,0>,<6.079,0.5907,1.5642>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9962,1.2254,1.5324>,<-0.9882284,-0.1529858,0>,<5.9864,1.2229,1.5327>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9545,1.4948,1.5239>,<-0.9882284,-0.1529858,0>,<5.9464,1.4926,1.5242>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9427,1.571,1.6977>,<-0.9882284,-0.1529858,0>,<5.9346,1.5689,1.6983>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9731,1.3747,1.7333>,<-0.9882284,-0.1529858,0>,<5.9637,1.3722,1.7338>,USE THEO=YES
HIT/BASIC,NORMAL,<6.083,0.6646,1.6803>,<-0.9882284,-0.1529858,0>,<6.0682,0.6613,1.6805>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1261,0.3864,1.7615>,<-0.9882284,-0.1529858,0>,<6.1088,0.3826,1.762>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1498,0.2336,1.7281>,<-0.9882284,-0.1529858,0>,<6.1311,0.2296,1.7284>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1371,0.3153,2.0892>,<-0.9882284,-0.1529858,0>,<6.1181,0.3114,2.0898>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0735,0.7265,2.0515>,<-0.9882284,-0.1529858,0>,<6.0581,0.7233,2.0518>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0159,1.0982,1.9876>,<-0.9882284,-0.1529858,0>,<6.0037,1.0955,1.9876>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9596,1.462,1.8582>,<-0.9882284,-0.1529858,0>,<5.9503,1.4601,1.8581>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9519,1.5116,2.0135>,<-0.9882284,-0.1529858,0>,<5.9424,1.5092,2.0141>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9907,1.2611,2.1037>,<-0.9882284,-0.1529858,0>,<5.979,1.2585,2.1044>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0356,0.9709,2.2605>,<-0.9882284,-0.1529858,0>,<6.0214,0.9677,2.2611>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0727,0.7317,2.2618>,<-0.9882284,-0.1529858,0>,<6.0567,0.7282,2.2622>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1162,0.4503,2.3353>,<-0.9882284,-0.1529858,0>,<6.0977,0.4463,2.336>,USE THEO=YES
HIT/BASIC,NORMAL,<6.1293,0.366,2.5031>,<-0.9882284,-0.1529858,0>,<6.11,0.362,2.5036>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0983,0.5662,2.6513>,<-0.9882284,-0.1529858,0>,<6.0801,0.5628,2.6518>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0506,0.8744,2.6428>,<-0.9882284,-0.1529858,0>,<6.0347,0.871,2.6431>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9828,1.3119,2.5143>,<-0.9882284,-0.1529858,0>,<5.9702,1.3092,2.5145>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9474,1.5409,2.3165>,<-0.9882284,-0.1529858,0>,<5.937,1.5383,2.3168>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9766,1.3522,2.8224>,<-0.9882284,-0.1529858,0>,<5.9634,1.3491,2.8229>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0352,0.9735,2.8835>,<-0.9882284,-0.1529858,0>,<6.0195,0.9702,2.8841>,USE THEO=YES
HIT/BASIC,NORMAL,<6.0918,0.6081,2.8804>,<-0.9882284,-0.1529858,0>,<6.0737,0.6042,2.8807>,USE THEO=YES
HIT/BASIC,NORMAL,<5.9799,1.3308,2.369>,<-0.9882284,-0.1529858,0>,<5.968,1.3281,2.3692>,USE THEO=YES
HIT/BASIC,NORMAL,<6.044,0.9171,2.4897>,<-0.9882284,-0.1529858,0>,<6.0288,0.9136,2.4903>,USE THEO=YES
ENDMEAS/
MOVE/POINT,NORMAL,<5.2307,0.8799,1.7594>
MOVE/POINT,NORMAL,<5.7291,0.9152,1.7796>
CIR15 =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<6.0344,0.9786,1.6565>,<-0.9882284,-0.1529858,0>,0.3465
ACTL/<6.0362,0.979,1.6497>,<-0.9882284,-0.1529858,0>,0.3528
TARG/<6.0344,0.9786,1.6565>,<-0.9882284,-0.1529858,0>
START ANG=0,END ANG=360
ANGLE VEC=<-0.1529858,0.9882284,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=PLN7,PLN7,PLN7
AUTO WRIST=NO
CIRCULAR MOVES=CIRCULAR
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=15,DEPTH=0.06,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=3,SPACER=0.05
AVOIDANCE MOVE=BOTH,DISTANCE=0.5
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MOVE/POINT,NORMAL,<5.2403,0.8774,11.8791>
DISPLAYPRECISION/2
DAT_A =SURFACE PROFILE : PLNA
FEATCTRLFRAME/SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,
LEAST_SQR,ITERATEANDREPIERCECAD=NO
STANDARDTYPE=ASME_Y14_5
PRIMARY DIMENSION/PROFILE OF SURFACE,1,<UZ>,<UTol>,<dat>,<MC>,<dat>,<MC>,<dat>,<MC>
NOTE/DAT_A
FEATURES/PLNA,,
DATDEF/FEATURE=PLNA,A
SCN3 =FEAT/SET,CARTESIAN
THEO/<1.97,-0.98,-0.95>,<0,0,1>
ACTL/<1.97,-0.99,-0.95>,<0,0,1>
CONSTR/SET,BASIC,CIR6,CIR11,,
DAT_B =POSITION : SCN3
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/2,DIAMETER,17.53,0.51,0
PRIMARY DIMENSION/POSITION,<D>,1.5,<MC>,A,<dat>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
NOTE/DAT_B
FEATURES/SCN3,,
DATDEF/FEATURE=SCN3,B
FCFLOC1 =POSITION : CIR3,CIR4
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/2,DIAMETER,8.89,0.51,0
PRIMARY DIMENSION/POSITION,<D>,2,<MC>,A,B,MMC,<size>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,A,<dat>,<dat>
NOTE/FCFLOC1
FEATURES/CIR3,CIR4,,
FCFLOC2 =POSITION : CIR3,CIR4
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/2,DIAMETER,8.89,0.51,0
PRIMARY DIMENSION/POSITION,DIAMETER,2,<MC>,A,B,MMC,<size>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,A,B,MMC,<size>,<dat>
NOTE/FCFLOC2
FEATURES/CIR3,CIR4,,
FCFLOC3 =POSITION : CIR15
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/1,DIAMETER,8.89,0.51,0
PRIMARY DIMENSION/POSITION,DIAMETER,2,<MC>,A,B,MMC,<size>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,A,B,MMC,<size>,<dat>
NOTE/FCFLOC3
FEATURES/CIR15,,
FCFLOC4 =POSITION : CIR15
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/1,DIAMETER,8.89,0.51,0
PRIMARY DIMENSION/POSITION,DIAMETER,2,<MC>,A,B,MMC,<size>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,A,B,MMC,<size>,<dat>
NOTE/FCFLOC4
FEATURES/CIR15,,
FCFPROF1 =SURFACE PROFILE : PLN4,PLN3,PLN7,...
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
COMPOSITE=NO,
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
PRIMARY DIMENSION/PROFILE OF SURFACE,3,<UZ>,<UTol>,A,B,MMC,<size>,<dat>
NOTE/FCFPROF1
FEATURES/PLN4,PLN3,PLN7,SCN1,SCN2,,