Having an issue calibrating my SP25 on my B&S Image running PC-DMIS 4.3 MR1 CAD++. It is measuring the sphere using touch points, then it will get most of the scans ok, but as it comes across from 180 over the top, the Z-rail continues to move while the ruby seems to "stick", the disk comes off the probe and then the disk will connect back to the probe as it rolls forward, violent... Obviously it won't finish the calibration. Anyone have any ideas how to get this to work?
My OPT PROBE settings are as follows:
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
OPTIONPROBE/MAXFORCE=0.5,LOWFORCE=0.04,UPPERFORCE=0.075,TRIGGE RFORCE=0.06,
PROBEACCURACY=0.1,POSACCURACY=0.1,#RETURNDATA=7,
RETURNSPEED=1,SCANPNTDENSITY=10,
SCANACCELERATION=5,SCANOFFSETFORCE=0.1,
PROBINGMODE=DFL,MANFINEPROBING=NO
My OPT PROBE settings are as follows:
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
OPTIONPROBE/MAXFORCE=0.5,LOWFORCE=0.04,UPPERFORCE=0.075,TRIGGE RFORCE=0.06,
PROBEACCURACY=0.1,POSACCURACY=0.1,#RETURNDATA=7,
RETURNSPEED=1,SCANPNTDENSITY=10,
SCANACCELERATION=5,SCANOFFSETFORCE=0.1,
PROBINGMODE=DFL,MANFINEPROBING=NO