I'm basically just exporting all the measured features into an excel sheet however i have ran out of room in PCDMIS for more code. Does anyone know how to continue this so that all the measured features stay basically in line 1 from left to right "see attached"
I still need to add V28 - V34 if i add another writeline it just inputs below the first line.
Solved see code 2 below! Thanks for the help everyone
Solved here
I still need to add V28 - V34 if i add another writeline it just inputs below the first line.
Solved see code 2 below! Thanks for the help everyone
Code:
C1 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Part Number?
NO,
################################# FAI Export to CSV #########################################
ASSIGN/V1=GETTEXT(647,1,{FCFLOC6})
ASSIGN/V2=GETTEXT(688,1,{FCFLOC6})
ASSIGN/V3=GETTEXT(647,1,{FCFLOC1})
ASSIGN/V4=GETTEXT(688,1,{FCFLOC1})
ASSIGN/V5=LOC1.D.MEAS
ASSIGN/V6=LOC2.D.MEAS
ASSIGN/V7=GETTEXT(688,1,{FCFLOC2})
ASSIGN/V8=GETTEXT(688,2,{FCFLOC2})
ASSIGN/V9=GETTEXT(647,1,{FCFLOC3})
ASSIGN/V10=GETTEXT(688,1,{FCFLOC3})
ASSIGN/V11=GETTEXT(647,1,{FCFLOC4})
ASSIGN/V12=GETTEXT(688,1,{FCFLOC4})
ASSIGN/V13=DIST1.M.MEAS
ASSIGN/V14=GETTEXT(647,1,{FCFLOC5})
ASSIGN/V15=GETTEXT(647,2,{FCFLOC5})
ASSIGN/V16=GETTEXT(688,1,{FCFLOC5})
ASSIGN/V17=GETTEXT(688,2,{FCFLOC5})
ASSIGN/V18=LOC3.D.MEAS
ASSIGN/V19=LOC4.D.MEAS
ASSIGN/V20=LOC5.Z.MEAS
ASSIGN/V21=LOC6.Z.MEAS
ASSIGN/V22=LOC7.Z.MEAS
ASSIGN/V23=DIST2.M.MEAS
ASSIGN/V24=DIST3.M.MEAS
ASSIGN/V25=DIST4.M.MEAS
ASSIGN/V26=LOC8.X.MEAS
ASSIGN/V27=LOC9.Z.MEAS
ASSIGN/V28=LOC10.Y.MEAS
ASSIGN/V29=LOC11.Y.MEAS
ASSIGN/V30=LOC12.Y.MEAS
ASSIGN/V31=GETTEXT(647,1,{FCFLOC7})
ASSIGN/V32=GETTEXT(688,1,{FCFLOC7})
ASSIGN/V33=GETTEXT(647,1,{FCFLOC8})
ASSIGN/V34=GETTEXT(688,1,{FCFLOC8})
FPTR =FILE/OPEN,Z:\QUALITY CONTROL\JAKE P\FAI REPORTS\FAI 01-005-04196-100 7.0 KEYMOD OMEGA RAIL UPPER, MACHINING\BOOK1.CSV,APPEND
FILE/WRITELINE,FPTR,C1.INPUT+","+V1+","+V2+","+V3+","+V4+","+V5+","+V6+","+V7+","+V8+","+V9+","+V10+","+V11+","+V12+","+V13+","+V14+","+V15+","+V16+","+V17+","+V18+","+V19+","+V20+","+V21+","+V22+","+V23+","+V24+","+V25+","+V26+","+V27+"
Code:
C1 =COMMENT/INPUT,NO,FULL SCREEN=NO,
Part Number?
$$ NO,
################################# FAI Export to CSV #########################################
ASSIGN/V1=GETTEXT(647,1,{FCFLOC6})
ASSIGN/V2=GETTEXT(688,1,{FCFLOC6})
ASSIGN/V3=GETTEXT(647,1,{FCFLOC1})
ASSIGN/V4=GETTEXT(688,1,{FCFLOC1})
ASSIGN/V5=LOC1.D.MEAS
ASSIGN/V6=LOC2.D.MEAS
ASSIGN/V7=GETTEXT(688,1,{FCFLOC2})
ASSIGN/V8=GETTEXT(688,2,{FCFLOC2})
ASSIGN/V9=GETTEXT(647,1,{FCFLOC3})
ASSIGN/V10=GETTEXT(688,1,{FCFLOC3})
ASSIGN/V11=GETTEXT(647,1,{FCFLOC4})
ASSIGN/V12=GETTEXT(688,1,{FCFLOC4})
ASSIGN/V13=DIST1.M.MEAS
ASSIGN/V14=GETTEXT(647,1,{FCFLOC5})
ASSIGN/V15=GETTEXT(647,2,{FCFLOC5})
ASSIGN/V16=GETTEXT(688,1,{FCFLOC5})
ASSIGN/V17=GETTEXT(688,2,{FCFLOC5})
ASSIGN/V18=LOC3.D.MEAS
ASSIGN/V19=LOC4.D.MEAS
ASSIGN/V20=LOC5.Z.MEAS
ASSIGN/V21=LOC6.Z.MEAS
ASSIGN/V22=LOC7.Z.MEAS
ASSIGN/V23=DIST2.M.MEAS
ASSIGN/V24=DIST3.M.MEAS
ASSIGN/V25=DIST4.M.MEAS
ASSIGN/V26=LOC8.X.MEAS
ASSIGN/V27=LOC9.Z.MEAS
ASSIGN/V28=LOC10.Y.MEAS
ASSIGN/V29=LOC11.Y.MEAS
ASSIGN/V30=LOC12.Y.MEAS
ASSIGN/V31=GETTEXT(647,1,{FCFLOC7})
ASSIGN/V32=GETTEXT(688,1,{FCFLOC7})
ASSIGN/V33=GETTEXT(647,1,{FCFLOC8})
ASSIGN/V34=GETTEXT(688,1,{FCFLOC8})
ASSIGN/WRITESTRING=C1.INPUT+","
ASSIGN/WRITESTRING=WRITESTRING+V1+","+V2+","+V3+","+V4+","+V5+","+V6+","+V7+","+V8+","+V9+","+V10+","+V11+","+V12+","+V13+","+V14+","+V15+","+V16+","+V17+","+V18+","+V19+","+V20+","
ASSIGN/WRITESTRING=WRITESTRING+V21+","+V22+","+V23+","+V24+","+V25+","+V26+","+V27+","+V28+","+V29+","+V30+","+V31+","+V32+","+V33+","+V34+"
FPTR =FILE/OPEN,Z:\QUALITY CONTROL\JAKE P\FAI REPORTS\FAI 01-005-04196-100 7.0 KEYMOD OMEGA RAIL UPPER, MACHINING\BOOK1.CSV,APPEND
FILE/WRITELINE,FPTR,WRITESTRING